08125/08231D 轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TDO
Series	08000
Cone	08125
Cup	08231D
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	31.750	mm
Cup Outside Diameter (D)	58.738	mm
Bearing Width (T)	32.542	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	7.61	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	13.2	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	26.5	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	29.3	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	51.1	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	102	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	6.17	kN
C(0) (Static Radial Rating)	35	kN
Ca(0) (Static Thrust Rating)	48.4	kN
K (.39 / Tan(contact angle))	1.23
e (1.5 * Tan(contact angle))	0.47
Y1 (0.45 / Tan(contact angle))	1.42
Y2 (0.67 / Tan(contact angle))	2.12
Cone Width	15.080	mm
Max Shaft Fillet Radius	1.0	mm
Cone BF Backing Diameter	37.5	mm
Min cage clearance inside cone BF	0.9	mm
Cup Width	24.608	mm
Max Housing Fillet Radius	0.4	mm
Cup RF Backing Diameter	55.0	mm
Cup LF Backing Diameter	55.0	mm
Remarks
>> GROOVE IN OD CENTER	08231D
>> HOLES IN OD CENTER	08231D