33275/33462D 轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TDO
Series	33000
Cone	33275
Cup	33462D
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	69.850	mm
Cup Outside Diameter (D)	117.475	mm
Bearing Width (T)	66.675	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	33.2	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	57.8	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	116	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	128	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	223	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	446	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	24.8	kN
C(0) (Static Radial Rating)	197	kN
Ca(0) (Static Thrust Rating)	250	kN
K (.39 / Tan(contact angle))	1.34
e (1.5 * Tan(contact angle))	0.44
Y1 (0.45 / Tan(contact angle))	1.55
Y2 (0.67 / Tan(contact angle))	2.31
Cone Width	30.162	mm
Max Shaft Fillet Radius	3.5	mm
Cone BF Backing Diameter	84.0	mm
Min cage clearance inside cone BF	2.3	mm
Cup Width	53.975	mm
Max Housing Fillet Radius	0.8	mm
Cup RF Backing Diameter	112.0	mm
Cup LF Backing Diameter	112.0	mm
Remarks
>> GROOVE IN OD CENTER	33462D
>> HOLES IN OD CENTER	33462D