DX212202/DX416731 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Cone	DX212202
Cup	DX416731
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	431.800	mm
Cup Outside Diameter (D)	603.250	mm
Bearing Width (T)	76.200	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	307	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	535	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	1070	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	1190	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	2060	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	4130	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	276	kN
C(0) (Static Radial Rating)	2190	kN
Ca(0) (Static Thrust Rating)	3340	kN
K (.39 / Tan(contact angle))	1.11
e (1.5 * Tan(contact angle))	0.52
Y (0.4 / Tan(contact angle))	1.14
Cone Width	73.025	mm
Max Shaft Fillet Radius	6.4	mm
Cone BF Backing Diameter	466.0	mm
Cone FF Backing Diameter	457.0	mm
Min cage clearance inside cone BF	18.7	mm
Max cage clearance outside cone FF	1.5	mm
Cup Width	50.800	mm
Max Housing Fillet Radius	6.4	mm
Cup BF Backing Diameter	558.0	mm
Cup FF Backing Diameter	563.0	mm