EE101103/101601CD 轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TDO
Series	100000
Cone	EE101103
Cup	101601CD
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	280.192	mm
Cup Outside Diameter (D)	406.400	mm
Bearing Width (T)	120.650	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	153	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	266	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	532	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	590	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	1030	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	2050	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	107	kN
C(0) (Static Radial Rating)	1180	kN
Ca(0) (Static Thrust Rating)	1410	kN
K (.39 / Tan(contact angle))	1.43
e (1.5 * Tan(contact angle))	0.41
Y1 (0.45 / Tan(contact angle))	1.65
Y2 (0.67 / Tan(contact angle))	2.46
Cone Width	50.211	mm
Max Shaft Fillet Radius	6.8	mm
Cone BF Backing Diameter	309.0	mm
Min cage clearance inside cone BF	7.7	mm
Cup Width	85.725	mm
Max Housing Fillet Radius	1.5	mm
Cup RF Backing Diameter	376.0	mm
Cup LF Backing Diameter	376.0	mm
Remarks
>> GROOVE IN OD CENTER	101601CD
>> HOLES IN OD CENTER	101601CD