EE275108/275155 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	275000
Cone	EE275108
Cup	275155
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	273.050	mm
Cup Outside Diameter (D)	393.700	mm
Bearing Width (T)	73.817	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	224	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	391	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	781	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	865	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	1510	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	3010	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	154	kN
C(0) (Static Radial Rating)	1600	kN
Ca(0) (Static Thrust Rating)	1870	kN
K (.39 / Tan(contact angle))	1.45
e (1.5 * Tan(contact angle))	0.40
Y (0.4 / Tan(contact angle))	1.49
Cone Width	69.850	mm
Max Shaft Fillet Radius	6.4	mm
Cone BF Backing Diameter	301.0	mm
Cone FF Backing Diameter	291.0	mm
Min cage clearance inside cone BF	14.4	mm
Max cage clearance outside cone FF	3.3	mm
Cup Width	50.005	mm
Max Housing Fillet Radius	6.4	mm
Cup BF Backing Diameter	366.0	mm
Cup FF Backing Diameter	378.0	mm