H917840/H917810 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	H917800
Cone	H917840
Cup	H917810
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	76.200	mm
Cup Outside Diameter (D)	180.975	mm
Bearing Width (T)	53.975	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	90.8	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	158	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	316	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	350	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	610	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	1220	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	114	kN
C(0) (Static Radial Rating)	458	kN
Ca(0) (Static Thrust Rating)	975	kN
K (.39 / Tan(contact angle))	0.80
e (1.5 * Tan(contact angle))	0.73
Y (0.4 / Tan(contact angle))	0.82
Cone Width	53.183	mm
Max Shaft Fillet Radius	3.5	mm
Cone BF Backing Diameter	110.0	mm
Cone FF Backing Diameter	100.0	mm
Min cage clearance inside cone BF	9.5	mm
Max cage clearance outside cone FF	2.8	mm
Cup Width	35.720	mm
Max Housing Fillet Radius	3.3	mm
Cup BF Backing Diameter	152.0	mm
Cup FF Backing Diameter	170.0	mm