H936340/H936310 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	H936300
Cone	H936340
Cup	H936310
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	155.575	mm
Cup Outside Diameter (D)	330.200	mm
Bearing Width (T)	85.725	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	249	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	433	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	867	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	960	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	1670	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	3340	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	345	kN
C(0) (Static Radial Rating)	1400	kN
Ca(0) (Static Thrust Rating)	3310	kN
K (.39 / Tan(contact angle))	0.72
e (1.5 * Tan(contact angle))	0.81
Y (0.4 / Tan(contact angle))	0.74
Cone Width	79.375	mm
Max Shaft Fillet Radius	6.4	mm
Cone BF Backing Diameter	209.0	mm
Cone FF Backing Diameter	192.0	mm
Min cage clearance inside cone BF	18.4	mm
Max cage clearance outside cone FF	8.4	mm
Cup Width	53.975	mm
Max Housing Fillet Radius	6.4	mm
Cup BF Backing Diameter	282.0	mm
Cup FF Backing Diameter	311.0	mm