HM220149/HM220110 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	HM220100
Cone	HM220149
Cup	HM220110
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	99.975	mm
Cup Outside Diameter (D)	156.975	mm
Bearing Width (T)	42.000	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	72.1	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	126	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	251	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	278	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	484	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	968	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	41	kN
C(0) (Static Radial Rating)	438	kN
Ca(0) (Static Thrust Rating)	425	kN
K (.39 / Tan(contact angle))	1.76
e (1.5 * Tan(contact angle))	0.33
Y (0.4 / Tan(contact angle))	1.80
Cone Width	42.000	mm
Max Shaft Fillet Radius	8.0	mm
Cone BF Backing Diameter	123.0	mm
Cone FF Backing Diameter	108.0	mm
Min cage clearance inside cone BF	2.1	mm
Max cage clearance outside cone FF	2.4	mm
Cup Width	34.000	mm
Max Housing Fillet Radius	3.6	mm
Cup BF Backing Diameter	142.0	mm
Cup FF Backing Diameter	151.0	mm