HM231149/HM231111CD 轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TDO
Series	HM231100
Cone	HM231149
Cup	HM231111CD
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	149.225	mm
Cup Outside Diameter (D)	236.538	mm
Bearing Width (T)	131.763	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	143	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	249	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	499	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	553	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	962	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	1920	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	78.2	kN
C(0) (Static Radial Rating)	932	kN
Ca(0) (Static Thrust Rating)	866	kN
K (.39 / Tan(contact angle))	1.83
e (1.5 * Tan(contact angle))	0.32
Y1 (0.45 / Tan(contact angle))	2.12
Y2 (0.67 / Tan(contact angle))	3.15
Cone Width	56.642	mm
Max Shaft Fillet Radius	3.5	mm
Cone BF Backing Diameter	167.0	mm
Min cage clearance inside cone BF	4.3	mm
Cup Width	106.362	mm
Max Housing Fillet Radius	1.5	mm
Cup RF Backing Diameter	224.0	mm
Cup LF Backing Diameter	224.0	mm
Remarks
>> GROOVE IN OD CENTER	HM231111CD
>> HOLES IN OD CENTER	HM231111CD