HM237545/HM237510CD 轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TDO
Series	HM237500
Cone	HM237545
Cup	HM237510CD
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	177.800	mm
Cup Outside Diameter (D)	288.925	mm
Bearing Width (T)	142.875	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	198	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	344	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	689	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	763	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	1330	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	2660	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	108	kN
C(0) (Static Radial Rating)	1240	kN
Ca(0) (Static Thrust Rating)	1150	kN
K (.39 / Tan(contact angle))	1.83
e (1.5 * Tan(contact angle))	0.32
Y1 (0.45 / Tan(contact angle))	2.12
Y2 (0.67 / Tan(contact angle))	3.15
Cone Width	63.500	mm
Max Shaft Fillet Radius	7.0	mm
Cone BF Backing Diameter	205.0	mm
Min cage clearance inside cone BF	5.8	mm
Cup Width	111.125	mm
Max Housing Fillet Radius	1.5	mm
Cup RF Backing Diameter	271.0	mm
Cup LF Backing Diameter	271.0	mm
Remarks
>> GROOVE IN OD CENTER	HM237510CD
>> HOLES IN OD CENTER	HM237510CD