HM259049/HM259010 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	HM259000
Cone	HM259049
Cup	HM259010
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	317.500	mm
Cup Outside Diameter (D)	447.675	mm
Bearing Width (T)	85.725	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	372	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	647	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	1290	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	1430	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	2500	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	4990	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	213	kN
C(0) (Static Radial Rating)	3140	kN
Ca(0) (Static Thrust Rating)	3060	kN
K (.39 / Tan(contact angle))	1.74
e (1.5 * Tan(contact angle))	0.33
Y (0.4 / Tan(contact angle))	1.79
Cone Width	85.725	mm
Max Shaft Fillet Radius	3.5	mm
Cone BF Backing Diameter	341.0	mm
Cone FF Backing Diameter	337.0	mm
Cone BF to Cage Clearance	unknown
Cone FF to Cage Clearance	unknown
Cup Width	68.262	mm
Max Housing Fillet Radius	3.3	mm
Cup BF Backing Diameter	418.0	mm
Cup FF Backing Diameter	428.0	mm