HM617049/HM617010 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	HM617000
Cone	HM617049
Cup	HM617010
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	85.725	mm
Cup Outside Diameter (D)	142.138	mm
Bearing Width (T)	42.863	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	62.7	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	109	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	218	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	242	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	421	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	842	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	46.3	kN
C(0) (Static Radial Rating)	399	kN
Ca(0) (Static Thrust Rating)	502	kN
K (.39 / Tan(contact angle))	1.35
e (1.5 * Tan(contact angle))	0.43
Y (0.4 / Tan(contact angle))	1.39
Cone Width	42.862	mm
Max Shaft Fillet Radius	4.8	mm
Cone BF Backing Diameter	106.0	mm
Cone FF Backing Diameter	95.0	mm
Min cage clearance inside cone BF	3.3	mm
Max cage clearance outside cone FF	2.4	mm
Cup Width	34.133	mm
Max Housing Fillet Radius	3.3	mm
Cup BF Backing Diameter	125.0	mm
Cup FF Backing Diameter	137.0	mm