HM801349/HM801310 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	HM801300
Cone	HM801349
Cup	HM801310
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	40.483	mm
Cup Outside Diameter (D)	82.550	mm
Bearing Width (T)	29.370	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	24.6	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	42.9	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	85.8	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	95.1	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	166	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	331	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	23	kN
C(0) (Static Radial Rating)	130	kN
Ca(0) (Static Thrust Rating)	207	kN
K (.39 / Tan(contact angle))	1.07
e (1.5 * Tan(contact angle))	0.55
Y (0.4 / Tan(contact angle))	1.10
Cone Width	28.575	mm
Max Shaft Fillet Radius	3.5	mm
Cone BF Backing Diameter	58.0	mm
Cone FF Backing Diameter	49.0	mm
Min cage clearance inside cone BF	2.1	mm
Max cage clearance outside cone FF	1.8	mm
Cup Width	23.020	mm
Max Housing Fillet Radius	3.3	mm
Cup BF Backing Diameter	68.0	mm
Cup FF Backing Diameter	78.0	mm