JHM88540/JHM88513 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	HM88500
Cone	JHM88540
Cup	JHM88513
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	30.000	mm
Cup Outside Diameter (D)	72.000	mm
Bearing Width (T)	29.370	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	20.9	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	36.4	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	72.8	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	80.6	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	140	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	281	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	19.5	kN
C(0) (Static Radial Rating)	111	kN
Ca(0) (Static Thrust Rating)	176	kN
K (.39 / Tan(contact angle))	1.07
e (1.5 * Tan(contact angle))	0.55
Y (0.4 / Tan(contact angle))	1.10
Cone Width	27.783	mm
Max Shaft Fillet Radius	1.3	mm
Cone BF Backing Diameter	44.5	mm
Cone FF Backing Diameter	42.5	mm
Min cage clearance inside cone BF	1.9	mm
Max cage clearance outside cone FF	1.8	mm
Cup Width	23.020	mm
Max Housing Fillet Radius	3.3	mm
Cup BF Backing Diameter	58.0	mm
Cup FF Backing Diameter	69.0	mm