JLM71094…/JLM710910 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	LM710900
Cone	JLM710949C
Cup	JLM710910
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	65.000	mm
Cup Outside Diameter (D)	105.000	mm
Bearing Width (T)	24.000	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	26	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	45.2	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	90.4	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	100	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	174	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	349	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	20.2	kN
C(0) (Static Radial Rating)	139	kN
Ca(0) (Static Thrust Rating)	184	kN
K (.39 / Tan(contact angle))	1.29
e (1.5 * Tan(contact angle))	0.45
Y (0.4 / Tan(contact angle))	1.32
Cone Width	23.000	mm
Max Shaft Fillet Radius	3.0	mm
Cone BF Backing Diameter	78.0	mm
Cone FF Backing Diameter	72.0	mm
Min cage clearance inside cone BF	1.5	mm
Max cage clearance outside cone FF	2.9	mm
Cup Width	18.500	mm
Max Housing Fillet Radius	1.0	mm
Cup BF Backing Diameter	96.0	mm
Cup FF Backing Diameter	101.0	mm