L281148/L281110CD 轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TDO
Series	L281100
Cone	L281148
Cup	L281110CD
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	660.400	mm
Cup Outside Diameter (D)	812.800	mm
Bearing Width (T)	203.200	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	561	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	977	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	1950	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	2170	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	3770	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	7540	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	320	kN
C(0) (Static Radial Rating)	5940	kN
Ca(0) (Static Thrust Rating)	5750	kN
K (.39 / Tan(contact angle))	1.76
e (1.5 * Tan(contact angle))	0.33
Y1 (0.45 / Tan(contact angle))	2.03
Y2 (0.67 / Tan(contact angle))	3.02
Cone Width	95.250	mm
Max Shaft Fillet Radius	6.4	mm
Cone BF Backing Diameter	693.0	mm
Min cage clearance inside cone BF	9	mm
Cup Width	158.750	mm
Max Housing Fillet Radius	1.5	mm
Cup RF Backing Diameter	788.0	mm
Cup LF Backing Diameter	788.0	mm
Remarks
>> GROOVE IN OD CENTER	L281110CD
>> HOLES IN OD CENTER	L281110CD