L713049/L713010 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	L713000
Cone	L713049
Cup	L713010
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	69.850	mm
Cup Outside Diameter (D)	101.600	mm
Bearing Width (T)	19.050	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	16	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	27.9	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	55.9	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	61.9	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	108	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	215	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	12.7	kN
C(0) (Static Radial Rating)	111	kN
Ca(0) (Static Thrust Rating)	149	kN
K (.39 / Tan(contact angle))	1.27
e (1.5 * Tan(contact angle))	0.46
Y (0.4 / Tan(contact angle))	1.30
Cone Width	19.050	mm
Max Shaft Fillet Radius	1.5	mm
Cone BF Backing Diameter	78.0	mm
Cone FF Backing Diameter	75.0	mm
Min cage clearance inside cone BF	0.8	mm
Max cage clearance outside cone FF	1.4	mm
Cup Width	15.083	mm
Max Housing Fillet Radius	1.5	mm
Cup BF Backing Diameter	93.0	mm
Cup FF Backing Diameter	98.0	mm