LL352149/LL352110 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	LL352100
Cone	LL352149
Cup	LL352110
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	279.400	mm
Cup Outside Diameter (D)	317.500	mm
Bearing Width (T)	24.384	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	41.2	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	71.8	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	144	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	159	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	277	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	554	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	24.4	kN
C(0) (Static Radial Rating)	467	kN
Ca(0) (Static Thrust Rating)	471	kN
K (.39 / Tan(contact angle))	1.69
e (1.5 * Tan(contact angle))	0.35
Y (0.4 / Tan(contact angle))	1.73
Cone Width	24.384	mm
Max Shaft Fillet Radius	1.5	mm
Cone BF Backing Diameter	288.0	mm
Cone FF Backing Diameter	286.0	mm
Min cage clearance inside cone BF	1.8	mm
Max cage clearance outside cone FF	2.1	mm
Cup Width	18.288	mm
Max Housing Fillet Radius	1.5	mm
Cup BF Backing Diameter	309.0	mm
Cup FF Backing Diameter	312.0	mm