LL714649/LL714610 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	LL714600
Cone	LL714649
Cup	LL714610
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	76.200	mm
Cup Outside Diameter (D)	105.570	mm
Bearing Width (T)	13.495	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	9.83	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	17.1	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	34.2	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	37.9	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	66	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	132	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	7.96	kN
C(0) (Static Radial Rating)	61	kN
Ca(0) (Static Thrust Rating)	84	kN
K (.39 / Tan(contact angle))	1.24
e (1.5 * Tan(contact angle))	0.47
Y (0.4 / Tan(contact angle))	1.27
Cone Width	13.495	mm
Max Shaft Fillet Radius	1.5	mm
Cone BF Backing Diameter	83.0	mm
Cone FF Backing Diameter	81.0	mm
Min cage clearance inside cone BF	0.9	mm
Max cage clearance outside cone FF	1.2	mm
Cup Width	9.525	mm
Max Housing Fillet Radius	1.5	mm
Cup BF Backing Diameter	99.0	mm
Cup FF Backing Diameter	102.0	mm