LM258648…/LM258610 双列内圈圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TDI
Series	LM258600
Cone	LM258648DW
Cup	LM258610
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	317.500	mm
Cup Outside Diameter (D)	422.275	mm
Bearing Width (T)	128.588	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	251	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	436	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	872	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	966	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	1680	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	3370	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	137	kN
C(0) (Static Radial Rating)	2230	kN
Ca(0) (Static Thrust Rating)	2080	kN
K (.39 / Tan(contact angle))	1.83
e (1.5 * Tan(contact angle))	0.32
Y1 (0.45 / Tan(contact angle))	2.11
Y2 (0.67 / Tan(contact angle))	3.15
Cone Width	128.588	mm
Max Shaft Fillet Radius	1.5	mm
Cone RF Backing Diameter	334.0	mm
Cone LF Backing Diameter	334.0	mm
Max cage clearance outside cone FF	7.2	mm
Cup Width	53.975	mm
Max Housing Fillet Radius	3.3	mm
Cup BF Backing Diameter	398.0	mm
Cup FF Backing Diameter	406.0	mm