LM29748/LM29710 单列圆锥滚子轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TS
Series	LM29700
Cone	LM29748
Cup	LM29710
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	38.100	mm
Cup Outside Diameter (D)	65.088	mm
Bearing Width (T)	18.034	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	11.7	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	20.3	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	40.6	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	45	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	78.3	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	157	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	6.64	kN
C(0) (Static Radial Rating)	60.3	kN
Ca(0) (Static Thrust Rating)	58.4	kN
K (.39 / Tan(contact angle))	1.76
e (1.5 * Tan(contact angle))	0.33
Y (0.4 / Tan(contact angle))	1.80
Cone Width	18.288	mm
Max Shaft Fillet Radius	3.5	mm
Cone BF Backing Diameter	49.0	mm
Cone FF Backing Diameter	42.5	mm
Min cage clearance inside cone BF	0.7	mm
Max cage clearance outside cone FF	1.1	mm
Cup Width	13.970	mm
Max Housing Fillet Radius	1.3	mm
Cup BF Backing Diameter	59.0	mm
Cup FF Backing Diameter	62.0	mm
Remarks
>> SPECIAL BACKFACE RADIUS	LM29748