LM654649/LM654610CD 轴承 USA 美国

Bearing Type	TRB
Bearing Subtype	TDO
Series	LM654600
Cone	LM654649
Cup	LM654610CD
Cone Hardening Type	Case carburized
Cup Hardening Type	Case carburized
Cone Bore Diameter (d)	285.750	mm
Cup Outside Diameter (D)	380.898	mm
Bearing Width (T)	139.700	mm
C90 (1-Row Basic Radial Rating for 90M Rev.)	184	kN
C90(2) (2-Row Basic Radial Rating for 90M Rev.)	320	kN
C90(4) (4-Row Basic Radial Rating for 90M Rev.)	639	kN
C1 (1-Row Basic Radial Rating for 1M Rev.)	708	kN
C1(2) (2-Row Basic Radial Rating for 1M Rev.)	1230	kN
C1(4) (4-Row Basic Radial Rating for 1M Rev.)	2470	kN
Ca90 (1-Row Basic Thrust Rating for 90M Rev.)	136	kN
C(0) (Static Radial Rating)	1720	kN
Ca(0) (Static Thrust Rating)	2160	kN
K (.39 / Tan(contact angle))	1.35
e (1.5 * Tan(contact angle))	0.43
Y1 (0.45 / Tan(contact angle))	1.56
Y2 (0.67 / Tan(contact angle))	2.33
Cone Width	65.088	mm
Max Shaft Fillet Radius	3.5	mm
Cone BF Backing Diameter	306.0	mm
Min cage clearance inside cone BF	7.9	mm
Cup Width	107.950	mm
Max Housing Fillet Radius	1.5	mm
Cup RF Backing Diameter	368.0	mm
Cup LF Backing Diameter	368.0	mm
Remarks
>> GROOVE IN OD CENTER	LM654610CD
>> HOLES IN OD CENTER	LM654610CD